InkjetInk_E

13/15

333333123: No part of the coated surface peeled off . 2: Less than 50% of the coated surface peeled off . 1: 50% or more of the coated surface peeled off .◯Examples of applicable materials* This is reference data; it does not guarantee inkjet ink performance.and dried at 80ºC for 1 minute. Then the several evaluations were conducted.Rubbing test conditions: 30 strokes of rubbing with a 200 g load (Substrate；PET)NISSIN CHEMICAL INDUSTRY CO.,LTD.FUNCTIONAL MATERIALS FOR INKJET INK CATALOGUEExamples of formulations of water-based pigment-type ink◯ Coating methodEach fi lm was coated with the solution above using Bar Coater No. 6 (wet, approx. 14g/m2) ◯EvaluationPigment dispersion (Pigment)Solvent ASolvent BResin (binder)Wetting agentAdditive to provide abrasion resistanceDefoaming agentWaterEvaluation itemAdhesionAbrasion resistanceWater friction resistanceAlcohol resistanceAcid resistanceSolvent A (glycol-based)Solvent B (alcohol-based)BinderWetting agentAgent for providing abrasion resistanceDefoaming agentEvaluation PVCPETNYLONPropylene glycol, Diethylene glycol,Triethylene glycol, 2-Pyrrolidone, Glycerin,Triethylene glycol monobutyl ether,Dipropylene glycol monomethyl ether, etc.Benzyl alcohol, Isopropanol, 2-Phenoxyethanol, etc.VINYBLAN 700 Series, various emulsions, various dispersionsOLFINE EXP. Series, OLFINE E Series, SILFACECHALINE E-370, LC-190, E-790OLFINE D-10PG, E1004Unit (wt%)VINYBLAN 701 dispersion liquid with 10〜305〜20Dipropylene glycol monomethyl ether5〜2010〜300.1〜1.0１〜100.1〜0.5RemainderresultCellophane tape peeling testRubbing test using gauzeRubbing test using gauze moistened with waterRubbing test using gauze moistened with ethanolRubbing test using gauze moistened with a 1% hydrochloric acid aqueous solution3Example of material addedcarbon blackIsopropanolVINYBLAN 755OLFINE EXP. 4300CHALINE LC-190OLFINE D-10PGWaterEvaluation methodUnit (wt%)30.010.010.030.00.510.00.19.4Formulation