Performance and mechanism of SILFACEPhysical properties of SILFACE SAG503A[General grade]接触角Contact angle動的表面張力（mN/m）Dynamic surface tension1Hz10Hz静的表面張力（mN/m）起泡性（mL）振とう直後5分放置後各種グレードを取り揃えております。使用用途によって推奨グレードは異なりますので、詳細については担当者にお問い合わせください。SILFACE is available in various grades. The recommended grade depends on the purpose of use. For more details, contact our contact person.Static surface tensionFoaming property (mL)Immediately after shakingAfter the aqueous solution wasallowed to stand for 5 min.Wetting property and permeabilitySILFACE migrates to the surface of the paint.Contact angle: Physical properties of 0.1 wt% aqueous solutionVarious kinds of substrate1 sec.after dropping10 sec.after dropping30 sec.after droppingSILFACE migrates to the surface of the paint.Contact angleSlip property and mold peelabilityImprovement in slip propertiesImprovement in antifouling propertiesCoefficient of frictionSubstrate: SUS304Solution: 0.1 wt% aqueous solution純水のみVarious kinds of substratePure water only塗布直後Immediatelyafter applicationシルフェイスSILFACE塗料などPaint oranother coatingSAG503A34°16°7°滴下1秒後滴下10秒後滴下30秒後塗料などPaint oranother coatingシルフェイスSILFACE塗布Apply各種基材3759223532スリップ性が向上防汚性が向上摩擦係数：滑りの程度を定量化した数値で、スリップ性が良いと摩擦係数は小さくなるA coefficient of friction is a numeric value that indicates howslippery the surface is. The better the slip properties are, thesmaller the coefficient of friction is.シルフェイスが塗料界面に移行塗料が濡れ広がりやすくなるThe paint gets wet and spreads easily.接触角：濡れの程度を定量化した数値で、濡れ性が良いと接触角は小さくなるA contact angle is a numeric value that indicates degree of wetting.The better the wetting property is, the smaller the contact angle is.シルフェイスが塗料界面に移行各種基材基材：SUS304 溶液：0.1wt%水溶液100°98°96°濡れ性、浸透性0.1ｗｔ％ 水溶液物性スリップ性、離型性接触角シルフェイスの性能とメカニズムシルフェイスＳＡＧ503Ａ物性［代表製品］
元のページ ../index.html#4